How to measure capacitor | How to check capacitors

Plan to check capacitors

Compensator capacitor is used a lot in electrical systems of factories, factories, large buildings in particular and in the industrial power system in general.

Capacitors have a great influence on the stability of current and electrical equipment, so it is necessary to check the capacitor carefully and regularly to avoid problems with serious consequences.

• Introduction What is a compensator and capacity compensating capacitor reactive

Checking capacitors regularly helps you plan maintenance or replace capacitors that no longer compensate for reactive power as desired.

How to measure capacitor with capacitance meter

The characteristic of the compensating capacitor is the capacitance, to check if the capacitor is still good or not, we use a capacitance meter to determine if the capacitor is still good or must be replaced.

Measurement of capacitors with a capacitance meter is the most accurate way to measure.

To measure the capacitance of the capacitor at this time, the capacitor must be unloaded, the capacitor has been discharged.

Can use multimeter device to measure capacitor capacity

How to check compensating capacitors with Nipmpere amp

In addition to measurement capacitor capacitance, there is another way testing capacitor by measuring current when capacitor capacitor is operating.

This method of measuring with a clamp meter is quite accurate and easier to do.

For that to be the correct indicator is to measure when the voltage is within the allowable range. From the current in operation, compared with the rated amperage, it is possible to give the quality results of the capacitor used by the compensating capacitor, the current used will be reduced over time.

Refer to installing capacitor cabinets: https://quanpham.vn/tu-bu-tu-tu-bu-tu-van-lap-dat-tu-tu-bu/