Instructions on how to squeeze pipes for ACSR . wiresQPC
PRESSING PROCESS TUBE FOR ACSR LINE
Before pressing the patch pipe, it is necessary to check that the cross-section or diameter of the conductor used must be the same cross-sectional size or diameter as the conductor indicated on the patch pipe.
2. How to install
a) Use gasoline and wire brush to clean dirt and oxidation layer of the conductor on the length of the part in contact with the patch tube. The maximum time from cleaning to pressing the conductor is 10 minutes.
b) The anterior directional portion of the patch tube is placed over the conductor and the remaining portion is inserted into the upper directional section along the groove so that the scratched, abraded portion of the conductor is covered.
c) The patch pipe is placed in between function Pressing and pressing, the position in the middle of the patch tube is the first pressing point. Then proceed to press from the middle to the edge of the pipe so that the rear joint overlaps 1/3 of the previous one.
After squeezing half, proceed to press the other half of the pipe so that the posterior joint overlaps 1/3 of the previous one.
Quan Pham Supplying accessories for pressing connections meeting the electrical industry standards TCVN, IEC,… Serving the construction of substations and medium voltage lines with Best quality, service and price in the market.
Materials: aluminum – copper, hot-dip galvanized steel, … Along with destructive loads from 40kN to 1000kN. Satisfy the demand for transmission lines and substations 110kV, 220kV, 500kV.
Quan Pham provides accessories such as: Pressure hose for ACSR wire, Cosse pressed copper and aluminum coated, head cosse, …
The company Quan Pham Industrial Electrical Equipment is a company specialized in providing:
- RTR capacitors – made in Spain
- Welding cable, rubber cable SAMWON – made in Korea
- DUSONC control cable – made in Korea
- Industrial socket BEKONEC – Made in Italy
- Started from Hancess – made in Korea
- MCB, ATB Hancess – made in Korea
- Timer Shinsung – made in Korea
Company Quan Pham was born to bring to customers the best products at the most reasonable prices. With the operating motto: “Customer satisfaction is our success “.
We are committed to bringing the best products to our customers, especially our products are always high standard, environmentally friendly, always suitable for the operating conditions of the power network Vietnam.
Leave a Reply